Brineena Studio
♥
Brineena Studio ♥
THE LATEST DROP
I designed these keychains with the Arirang World Tour in mind! They are member name specific and include the band name. Each keychain comes with a tiny, decorational picket fan. These keychains were handmade by me in my studio. 💖
DIMENSIONS:
9" x 2.5” while dangling
MATERIALS:
-3D printed letters and logo keychain (PLA)
-Metal O keyring, chains, jump rings, and ball bead chain
-Zinc alloy microphone charm
-Acrylic star charm
-Plastic picket fan with holographic stickers on both sides
-Small ribbon bow
-Nylon braided knot keychain
•Bandana neck hole circumference - 12”
•The bandana best fits adult cats and small dogs.
•When snapped together and laid flat - 6” x 5” (w x h)
Fabric:
•Pattern placement may vary from that in the listing photo. Each bandana will look different but I try to keep the best placement in mind when cutting the fabric.
•There are two sides to this bandana which means it's reversible! I chose 2 fabrics to complement each other.
•100% Cotton
Care Instructions:
• Machine wash cold in the delicate cycle. Lay flat to dry. Iron if needed - avoid the button snap.
Safety:
•Make sure the bandana isn’t too tight. Two fingers should be able to fit between the collar and your pet’s neck. Don’t leave your pet unsupervised when the pet bandana is in use. Pet bandanas are for special occasions or photos. It’s not recommended for 24/7 use. Keep away from open flame. If broken, discontinue use as small parts could be a choking hazard for both pets and children.
Hand sewn with love in my studio! 💖
Mini Skate Frog stickers ready to peel and use! Use these stickers in your journals, notebooks, planners, or calendars. These stickers are lovingly designed and handmade by me in my studio. I’m trying to spread the joy of frogs one smol sticker sheet at a time.~ 🐸
DIMENSIONS: 3.5"x4.75"
*Printed on sticker paper
*Not waterproof - Best used for stationary!
*Make sure the surface you’re applying your sticker to is clean and dry. Use your nails or tweezers to peel the backing off of the sticker. Apply the sticker from one side to the other while smoothing out. (For best results, apply to a flat surface.)
These keychains give Borahae vibes with their color scheme! They are member name specific and include the band name. Each keychain comes with a tiny, decorational picket fan. These keychains were handmade by me in my studio. 💖
DIMENSIONS:
9" x 2.5” while dangling
MATERIALS:
-3D printed letters and logo keychain (PLA)
-Metal O keyring, chains, jump rings, and ball bead chain
-Zinc alloy microphone charm
-Acrylic star charm
-Plastic picket fan with holographic stickers on both sides
-Small ribbon bow
-Nylon braided knot keychain
DIMENSIONS:
2.25" x 2.25"
MATERIALS:
-Pinback button
-Image printed on photo paper
-Covered with clear film
*Perfect for backpacks, bags, jean jackets, or any other fabric surfaces you can pin a button onto!
DIMENSIONS:
2.25" x 2.25"
MATERIALS:
-Pinback button
-Image printed on photo paper
-Covered with clear film or holographic film
*Perfect for backpacks, bags, jean jackets, or any other fabric surfaces you can pin a button onto!
DIMENSIONS:
2" x 3.25"
MATERIALS:
-Printed on weatherproof sticker paper
-Laminated with holographic film
*Perfect for helmets, laptops, water bottles or any other surfaces you want a sticker on!
*If placed on a water bottle, hand wash and dry afterwards.
*Make sure the surface you’re applying your sticker to is clean and dry. Use your nails or tweezers to peel the backing off of the sticker. Apply the sticker from one side to the other while smoothing out. (For best results, apply to a flat surface.)
DIMENSIONS:
1.5" x 3"
MATERIALS:
-Printed on weatherproof sticker paper
-Laminated with holographic film
*Perfect for helmets, laptops, water bottles or any other surfaces you want a sticker on!
*If placed on a water bottle, hand wash and dry afterwards.
*Make sure the surface you’re applying your sticker to is clean and dry. Use your nails or tweezers to peel the backing off of the sticker. Apply the sticker from one side to the other while smoothing out. (For best results, apply to a flat surface.)
DIMENSIONS:
2" x 1.75"
MATERIALS:
-Printed on weatherproof sticker paper
-Laminated with holographic film
*Perfect for helmets, laptops, water bottles or any other surfaces you want a sticker on!
*If placed on a water bottle, hand wash and dry afterwards.
*Make sure the surface you’re applying your sticker to is clean and dry. Use your nails or tweezers to peel the backing off of the sticker. Apply the sticker from one side to the other while smoothing out. (For best results, apply to a flat surface.)
Size:
•Unsnapped bandana length - 12”
•The bandana best fits adult cats and small dogs.
•When tied in bow - 5" x 1.5" (w x h)
•Bow length reaches 6.5” when left in its original tied position.
•Adjustable - The bow can be re-tied if your pet’s neck is too small or big!
Fabric:
•Pattern placement may vary from that in the listing photo. Each bandana will look different but I try to keep the best placement in mind when cutting the fabric.
•There are two sides to this bandana which means it's reversible! I chose 2 fabrics to complement each other.
•100% Cotton
Care Instructions:
• Machine wash cold in the delicate cycle with the bow untied. Lay flat to dry. Iron if needed - avoid the button snap.
Safety:
•Make sure the bandana isn’t too tight. Two fingers should be able to fit between the collar and your pet’s neck. Don’t leave your pet unsupervised when the pet bandana is in use. Pet bandanas are for special occasions or photos. It’s not recommended for 24/7 use. Keep away from open flame. If broken, discontinue use as small parts could be a choking hazard for both pets and children.
Hand sewn with love in my studio! 💖
DIMENSIONS:
3.5" x 1.5"
MATERIALS:
-Printed on weatherproof sticker paper
-Laminated with holographic film
*Perfect for helmets, laptops, water bottles or any other surfaces you want a sticker on!
*If placed on a water bottle, hand wash and dry afterwards.
*Make sure the surface you’re applying your sticker to is clean and dry. Use your nails or tweezers to peel the backing off of the sticker. Apply the sticker from one side to the other while smoothing out. (For best results, apply to a flat surface.)
CREATING
accessories
HUMANS
FOR
AND
Pets
THEIR

